Delkron 36 Billet Cam Support Plate User Manual download pdf

D2141 Delkron Billet Cam support Plate Instructions

This part fits 2006-up Dyna models & 2007–up All Twin Cam Models

!!WARNING!!

The safety of the rider and others depends on the correct installation of this product.

If the installation of this product is not within your mechanical capabilities or you do

not have the correct tools please have a qualified technician install this product for

you.

SPECIAL TOOLS NEEDED

ü Service Manual

ü S/E Magnetic lifter holders (93979-10)

ü Camshaft assembly tool (HD-47956)

ü Crank/Cam Shaft Sprocket Locking Tool (HD-47941)

ü Red Loctite 262 Threadlocker

ü Blue Loctite 243 Threadlocker

!!WARNING!!

To avoid accidental starting remove the main fuse or disconnect the battery.

Disassembly

1. If reusing stock pushrods the top rocker cover, breather assembly and

rocker support plate must be removed. If replacing with aftermarket

adjustable pushrods the pushrod covers can be collapsed and stock

pushrods cut with bolt cutters.

2. Remove cam cover socket head screws “Notice” cam cover screws are

¼-20 X 1 ¼” keep these separate from the ¼-20 x 1” cam support

plate screws as they are not interchangeable. Remove cam cover and

discard old gasket.

!!NOTICE!!

At this point we recommended checking crankshaft run-out with a dial indicator.

Crankshaft run-out must NOT exceed .0025”. If run-out exceeds .0025” you must

correct this problem before proceeding. Crankshafts with excessive run out will

damage the cam plate, oil pump, cam & crank gears if a gear drive is used.

Crankshaft run out is extremely critical when using a gear drive. Delkron

recommends being under the max run out tolerance for proper installation and the

quietest possible running gear mesh. Excessive crankshaft run out will also void

manufacturers warranty.

Cam Chain and Cam sprocket Removal

1. If reusing cam chain mark one of the link plates to identify “outside”

for reinstallation keeping rotation the same may prolong chain life.

1 2 3 4

Summary of Contents

Page 1

1 D2141 Delkron Billet Cam support Plate Instructions This part fits 2006-up Dyna models & 2007–up All Twin Cam Models !!WARNING!! The safety

Page 2

2 2. Insert a piece of wire into the retention hole of the primary cam chain tensioner this will keep the assembly together. Then remove the two bol

Page 3

3 12. First torque all oil pump screws to 40-45 in-lbs. then final torque to 90-120 in-lbs. 13. If reinstalling chain drive gears follow installation

Page 4

4 Terms & Conditions Our products are manufactured in QS-9001 certified facilities and all of our castings are produced using the highest qualit

Comments to this Manuals

No comments

Delkron 36 Billet Cam Support Plate User Manual

Browse online or download User Manual for For motorcycles Delkron 36 Billet Cam Support Plate. Delkron 36 Billet Cam Support Plate User Manual

Summary of Contents

Comments to this Manuals